Products

Home/Products

Category

Ferro Silicon
High Carbon Silicon
Silicon Metal
Ferro Silicon Chrome
Nitride Alloy
Electrolytic Manganese Flakes
Nodulizer & Inoculant
Silicon Manganese
Silicon Carbide & Alloy Powder
Ferro Chrome
Cored Wires
Calcium Silicon
FerroAlloy Briquette
Ferro Phosphorus
Other Related Products
Granulated Blast Furnace Slag

Ferro Phosphorus Alloy Lump

Ferrophosphorus alloys lump are mainly composed of phosphorus and iron, and also contain impurities such as silicon, manganese, carbon, and sulfur. According to the phosphorus content, they are...

Add to Inquiry
Si58Ca30 Calcium Silicon Alloy

Si58Ca30 Calcium Silicon Alloy is mainly composed of silicon (about 58%) and calcium (about 30%). In addition, it may contain a small amount of impurities such as iron, aluminum, carbon, sulfur,...

Add to Inquiry
70 Ferro Silicon Powder

High-quality 70 Ferro Silicon Powder (FeSi70) for efficient steel deoxidation and cast iron inoculation. ISO 9001 certified with customizable sizing (0-1mm, 1-3mm, etc.). Get a quote from the...

Add to Inquiry
Industrial Metallic Silicon 441

Industrial Silicon Metal 441 is an important grade of industrial silicon metal. The "441" in Industrial Silicon Metal 441 is a numbering method that indicates its chemical composition. Among them,...

Add to Inquiry
Metallurgical Grade Silicon Metal 441

AON supplies Metallurgical Grade Silicon Metal 441 (Fe≤0.4%, Al≤0.4%, Ca≤0.1%), used in organosilicon synthesis, aluminum alloy casting, and special steel smelting. Cleaner than 553, cheaper than...

Add to Inquiry
Calcium Silicon Alloy For Casting

In today's global foundry industry, which pursues high density, excellent mechanical properties, and complex thin-walled structures, calcium silicon alloys, due to their unique composite...

Add to Inquiry
Calcium Silicon Alloy For Metallurgy

AON supplies metallurgical calcium silicon alloys (Ca31/Ca28/Ca24), comparing three addition methods: direct addition (yield 1-3%), powder injection (5-8%), and wire feeding (10-30%). Cost-benefit...

Add to Inquiry
Calcium Silicon Powder Metallurgy

AON METALS's original factory supplies calcium silicon alloys specifically for powder metallurgy. Precise deoxidation, enhanced sintering, and improved part strength and wear resistance. Grades...

Add to Inquiry
99.5% 99.7% Electrolytic Manganese Mn Flakes

AON sources 99.5%/99.7% high-purity electrolytic manganese flakes (EMM Flakes) for use in 200/300 series stainless steel, high-strength steel, aluminum alloys, manganese tetroxide, and welding...

Add to Inquiry
Ferro Silicon Al Less Than 0.5

Ferrosilicon (Al Less Than 0.5) is a high-end ferroalloy designed for "high-purity steel" and "high-quality steel" in modern metallurgical industry, where the control of non-metallic inclusions is...

Add to Inquiry
Deoxidizer Silicon Slag For Steel Making

Silicon slag is a byproduct produced in industrial production (such as the smelting process of silicon metal and ferrosilicon). Its main component is silicon oxide, and it also contains a certain...

Add to Inquiry
6515 High Carbon Silicon For Steelmaking

6515 high carbon silicon used for steelmaking usually refers to carbon silicon alloy, in which the silicon content is about 65% and the carbon content is about 15%. It is mainly composed of...

Add to Inquiry